Airsoft G36 stanag adaptorBy Cults on June 27, 2019 21:48
The most advanced magwell you can print to date (27.06.2019).
To be frank this is a replica of spuhr magazine adaptor. It operates the same way. And looks as close as it can get for airsoft.
Both buttons for index finger are functional. Originaly made for umarex G36. should work with everyone, But if not, feed tower is separate part and swappable.
We will need 2 m3x30 tapered bolts, some 2.4mm dia nails and 1-2 4.5dia coil springs.
Printing and assembling this is somewhat challenging. Ideally you want to use ABS and acetone, not to smooth it out, but to glue it together. Parts are keyed there is my lazy explosion scheme to give you an idea. DO NOT glue feed tower (the blue part on renderings). It requires 2 m3x30 tapered bolts, nuts are optional.
So when 4 main parts are printed asseble them on your g36. Take a syringe fill it with acetone and carefully fill the gaps. Be wary your gun is likely made from the same polymer don't glue it to adapter permanently. Leave it on gun until it dries. Alternatively you can use light mix of abs juice.
The rest is assembled with nails cut to pieces. (2.4mm dia.)
For the magazine catch you will need 2 springs +-4.5mm I found them in heatsink from old pc motherboard. If you have trouble finding exact spring , contact me, model can be customized to have up to 7mm dia. springs.
And finally the feed tower. Ideally print it in a different color. You need to have solvent 646 or just dilute some acetone. Really tiny amount wold do. Take an ear stick rinse in , rub the inside of feed tower until smooth. DONE. Assemble and enjoy.
P.s. magazines may very pretty wildly. If you have problems with catch..or fitment contact me. I will adjust model for you.