By Cults on October 9, 2019 08:08
Chassis from 2HP to 1/6 for the static version (front hubs do not use bearings). The screws used are M3 x10, M3 X16, M3X20 and M3X25mm. M2x10, M2x20mm screws. It also requires 1m of M3, M4 and M5 threaded rod. Also provide the corresponding nuts. 1m of 19 x 8 mm aluminium angle is used to make the two aluminium longitudinal members.
3D file format: PDF and STL