Umarex Morph 3x bipod scope mount softair airsoftBy Cults on July 10, 2019 20:45
Here you can download my files for a scopemount and a bipod for the Umarex Morph 3x.
The scopemount is made for a sutter 3-7x20 scope with a diameter of 19mm
The bipod is made for a raildiameter of 22 mm. You will need some springs for the bipod.
I used some foam to save the rail and the scope.
You need to print "scopemount part 2" 2 times.
You need to print "bipod part 3" 2 times. One time mirrored.
To mount the scope just release the notch and use the same screw to mount part 1.
Each part 2 will be mounted with 2 M3 screws and nuts. at least M3x10.
To Mount the bipod you will need four M4x20 screws and 4 nuts.
If you got any questions or suggestions, feel free to ask.